1. Extruder: 1 set

(1) Screw dia.: 85mm; Rotation speed: 0～80rpm,

(2) L:D: 30:1; Material of screw: 38CrMoALA;

The screw is special design for PET recylce material.

(3) Pressure feedback system to control screw speed..

(4) Melt filter: Melt filter changer with candles

(5) Spinneret device: 1 set

(6) Melt pump: 1 set

(7) Heater: Electric heating ring .

(8) Magnet basement: 1 set

2. Quenching Tank:1 set

(1) The tank is made by Stainless Steel 304.

(2) The horizontal pushing structure is conveniently to disassembly the spinneret.

3. First Seven roller Stretching unit: 1 set

(1) Seven pieces variable diameter roller with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Built-out oil lubrication system.

4. Hot water Tank:1 set

(1) Heating power: 70KW; Copper heating pipe

(2) Material is stainless steel 304 with heat preservation.

(3) Equip two pressing roller.

5. Second seven rollers stretching unit

(1) Seven pieces variable diameter roller with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Built-in oil lubrication system.

6. Spindle winder: 33 spindles

(1) Spool

(2) Winding bobbin as per clinet's reqeust.

(3) Tesnion control by inverter.